#diy
2 articles · 16 raw sources · 2 inventory
How to actually build an adsorption chiller. Pick the working pair first (it decides safety and vessel type): zeolite/silica + WATER is the safe demonstrator (deep vacuum, no toxic…
Practical reference for encapsulating a translucent PCM as a DIY secondary-glazing panel behind an existing window. Container choice: polycarbonate (twin-wall) is the best transluc…
Inventory
Active build experiment: the SAFE water-refrigerant adsorption cooling demonstrator (two valved vessels under vacuum, no toxic/flammable refrigerant). Purpose is to learn leak-tigh…
Next: Build the safe two-vessel zeolite/silica–water demonstrator per the protocol, populate the cooling-stroke + cycle logs, then promote results into references/diy-adsorption-chiller as a 'Measured build' section.
Active build experiment: a CMC-gelled Glauber's-salt PCM panel in twin-wall polycarbonate off-cuts (build path 1). Purpose is to fill the literature gap — no documented, MEASURED a…
Next: Build the CMC-gelled Glauber's-salt panel in twin-wall PC off-cuts per the protocol, populate the measurement log (diurnal + weekly), then promote results into references/diy-pcm-encapsulation as a 'Measured build' section.
Raw sources
- DIY Phase Change Material for Heat Storage (BuildItSolar) · 2026-07-02
- Micron-gauge vacuum evacuation & decay test procedure (HVAC Laboratory) · 2026-07-02
- DIY Solar Concentrators, Made Better (CPCs) — NightHawkInLight · 2026-06-26
- Perfect Aircrete, Kitchen Ingredients (NightHawkInLight) · 2026-06-26
- DIY adsorbent-bed fabrication — sorbent choice, activation, packing, conductivity (research note) · 2026-07-02
- DIY adsorption chiller — amateur-build reality check (research note) · 2026-07-02
- DIY evaporator/condenser design & refrigerant choice for sorption cooling (research note) · 2026-07-02
- Low-cost vacuum gauge options for the water adsorption demonstrator (research note) · 2026-07-02
- DIY vacuum, leak-tightness & non-condensables for sorption cooling (research note) · 2026-07-02
- Low-cost vacuum pump options for the water adsorption demonstrator (research note) · 2026-07-02
- PCM container / sealant / metal compatibility matrix (research note) · 2026-07-02
- Performance Evaluation of a Solar Powered Solid Adsorption Refrigerator Under a Tropical Humid Climate (Anjorin & Bello, EJET 2015) · 2026-07-02
- Zeolite-Water Adsorption Refrigeration System (Chachad & Bhadane, IJRITCC 2016) · 2026-07-02
- An ammonia-carbon solar refrigerator for vaccine cooling (Critoph, Renewable Energy 1994) · 2026-07-02
- Experimental Data on a Solar-Powered Ice Maker Using Activated Carbon and Methanol (Pons & Guilleminot, J. Solar Energy Eng. 1987) · 2026-07-02
- Evaluation of Low-Pressure Flooded Evaporator Performance for Adsorption Chillers (Thimmaiah, Bahrami et al., Energy 2017) · 2026-07-02